Temporary Power Distribution Boxes: Uses and Sourcing Guide
A temporary power distribution box is a portable enclosure that takes one incoming supply …
A strut channel macchina per la formatura a rullo turns flat steel coil into lipped, C-shaped support channel, usually slotted or punched along its length, and then cuts it to length. The finished strut carries cable trays, pipes, conduit and solar module rails. The line therefore sits next to cable tray and solar-mounting production rather than replacing it.
It is a continuous cold roll forming line built around one profile family: strut, also called metal framing channel. People often say “Unistrut” for this product. Unistrut is a brand name that became shorthand for the whole category.
The machine does not bend the channel in one hit, as a press brake would. Strip passes through a series of roll stations. Each station changes the cross-section a little until the flat back, the two side walls and the inward-turned lips are formed. Punching and cutting are built into the same line, so the output is finished channel in sellable lengths instead of semi-finished strip.

The lips at the open face are what make strut useful. A channel nut fits into the opening anywhere along its length, turns a quarter turn, and locks against the lips. Brackets, clamps and hangers can then be bolted on without drilling on site.
A strut line typically produces some mix of the following:
Section depth, width, gauge and slot pitch depend on the support system the strut belongs to and the market it is sold into.
A complete strut line follows the integrated workflow Chenlong describes for its automated production lines. The stations are:
Chenlong sells each of these as a separate equipment category. That matters if an existing plant only needs its punch or its run-out table replaced instead of a whole new line.

Strut rarely acts as the main product in a support system. It is the structural layer underneath.
In cable tray installations, strut is commonly used for trapeze hangers and wall brackets. The tray itself is a different profile: wider, shallower, often perforated or ladder-type. Chenlong builds production lines for the tray side of this system, including tray-type, ladder, perforated, solid-bottom and channel-type cable tray profiles.
In solar mounting, strut-style channel is used as rails and cross members that carry module clamps. Chenlong lists new-energy and custom industrial applications among the industries it serves. Solar projects usually need strut to a project drawing, with specific slot positions for the clamp hardware chosen for that project.
The practical point for a manufacturer: if you already supply cable tray or solar structures, strut is the adjacent product your customers buy alongside them. That makes it a natural expansion. It does not mean your existing line can make it.
Specialist suppliers commonly offer dedicated single-profile strut lines. Compared with that category-level approach, a line customized around your own drawings gives tighter control of slot patterns and sizes. In return, every profile has to be engineered up front.
| Factor | Dedicated strut line | Line customized to your drawings | Buying finished channel |
| What it is optimized for | One strut family at volume | Your specific sections and punch patterns | No equipment investment |
| Profile changeover | Limited to the family it was tooled for | Defined at design stage; added later only with new tooling | Not applicable |
| Upfront cost | Equipment + tooling | Equipment + tooling + engineering time | None; cost moves into unit price |
| Control over slot pattern and stock | Elevata | Elevata | Depends on supplier’s catalog |
| Real drawback | Poor fit if your drawings deviate from the standard family | Longer lead time; drawings must be final before tooling is cut | Margin and delivery timing depend on someone else |
| Soluzione ideale | Steady demand for standard sizes | Project or market-specific profiles | Low or uncertain volume |
The third column deserves consideration. Chenlong supplies production equipment, finished profiles, or both. For a buyer testing demand in a new market, sourcing channel first and investing in a line once volumes are proven is a legitimate path.

Strut lines combine punching and cutting, both high-hazard zones. ISO 12100:2010 (International Organization for Standardization) sets out the general principles of risk assessment and risk reduction for machinery design. Asking a supplier how its guarding and interlocks follow that approach is a fair technical question.
For lines going to the EU, timing now matters. According to the European Commission, machinery placed on the EU market before January 20, 2027 falls under the Machinery Directive 2006/42/EC. Regulation (EU) 2023/1230 applies from that date. A line contracted in late 2026 may ship either side of that date, so confirm which framework the Declaration of Conformity will reference. CE marking is a manufacturer’s conformity declaration under these rules. It should not be treated as a generic third-party certificate.
Not as a named catalog product. Chenlong’s published lines cover cable tray, shelving, purlins, keels, panels, door frames and cabinet components. A strut request would be assessed as a custom engineering project based on your drawings.
Not without separate tooling, and usually not efficiently. Tray profiles are wide and shallow, while strut needs fully inward-turned lips. The two should be treated as different forming problems even when they share a punch and cut-off design.
Chenlong quotes every line per project. The price depends on the number of profiles, punch pattern, punching sequence, line speed and automation level, so a figure without drawings would not be meaningful.
Chenlong publishes 20–30 business days for standard equipment and 40–60 business days for custom equipment. A strut line built to your drawings would be custom. Expedited production may be available for urgent orders.
A temporary power distribution box is a portable enclosure that takes one incoming supply …
Seven electrical panel board types explained for cabinet and switchgear manufacturers, plu…
Ti risponderemo entro 24 ore. In caso di emergenza, aggiungi WhatsApp/WeChat: +8613863639320,. Oppure chiama direttamente +8613863639320.
*Rispettiamo la tua riservatezza e tutte le informazioni sono protette.
Utilizzeremo le tue informazioni solo per rispondere alla tua richiesta e non invieremo mai email non richieste o messaggi promozionali.