Ekipmandan Profillere - Dünya Çapında Güvenilen Eksiksiz Çözümler.

10
2026.09
Satılık Rulo Şekillendirme Makinesi: Yeni ve İkinci El Karşılaştırması, Kontrol Edilecekler
11:19

Chenlong Technical Team | Corporate Technical Author, Weifang Chenlong Intelligent Technology Co., Ltd. | Published:  September 2026

Most searches for a rulo şekillendirme makinesi satılık kullanılmış ekipman ilanlarını gösterir. Kullanılmış hatlar daha ucuzdur ve daha hızlı sevk edilir, ancak başka birinin profiline göre takımlanmış olarak gelir. Yeni hatlar çiziminize göre tasarlanır ve üretim süresi gerektirir. Doğru seçim, kesitinizin piyasada hâlihazırda bulunanlarla uyumlu olup olmadığına bağlıdır.

Information current as of August 2026. Chenlong builds new custom lines and does not operate a used-equipment marketplace, so take the used-machine section below as an inspection checklist rather than a sales pitch — the checks are the same ones our engineers run when a customer asks us to evaluate a second-hand line.

Aynı ifade altında üç farklı şey satılıyor

Search results for “roll former for sale” or “roll forming line for sale” mix three markets that have almost nothing in common.

Used equipment listings on marketplaces and dealer sites. Fast to buy, priced against scrap and location as much as against capability, and almost always sold with the tooling of whatever the previous owner was making.
Stock standard machines, usually small or portable units for common building profiles such as roofing panels or light framing sections. Ready to ship, fixed capability, no engineering involved.

Custom-engineered lines built around a specific profile drawing. This is what Chenlong makes, and it is the category where the phrase “for sale” is least accurate — nothing is sitting in a warehouse waiting for a buyer.

Deciding between them is mostly a question about your part, not about your budget.

Depo Rafları ve Süpermarket Rafları

New vs used, side by side

Boyut Used line New custom line
What you are buying A machine plus the previous owner’s tooling A machine engineered to your cross-section
Profile match Yalnızca profil kesitiniz onlarınkiyle eşleşiyorsa veya kalıpları değiştirirseniz By definition
İlk hatasız parçaya kadar geçen süre Shipping and reinstall, then a debugging period of unknown length Published build time, then installation, commissioning, first-article approval
Tooling status Worn by an unknown amount; roll flower design usually undocumented Yeni; tasarım üreticinin elinde
Kontrol sistemleri ve yazılım Whatever generation the line was built with; may be unsupported Current; servo feeder brand specifiable
Elektrik beslemesi Önceki tesisin gerilim ve frekansına göre üretilmiş Configured to your local supply
Yedek parçalar Depends on whether the original builder still exists Üreticiden, hatla birlikte
Conformity documentation Yalnızca satıcı onu sakladıysa makineyle birlikte gelir Siparişin bir parçası olarak hazırlanmıştır
Parçalar hatalı çıktığında mühendislik desteği Ayrı olarak sözleşmeye bağlamadığınız sürece hiçbiri The party that designed the pass sequence
Cash out at signing Full amount, usually before shipping peşinat, bakiye incelemeden sonra ve sevkiyattan önce

The last row is worth reading twice. On used equipment, payment structure usually favours the seller entirely, and there is no inspection stage that you control.

Why used still makes sense sometimes

A used line is the right answer more often than a manufacturer’s blog will normally admit.

Gereken kesitiniz makinenin üretim amacıyla gerçekten örtüşüyorsa — aynı profil ailesi, benzer kalınlık ve benzer genişlik — sehpalarla birlikte çalışır durumdaki takımları da satın almış olursunuz ve pahalı olan kısım da bu takımlardır. Kullanılmış bir hattın başlangıçta aynı raf dikmesi veya aynı tava kesiti için üretildiğini bulan bir tesis, yeni ekipmanla elde edilemeyecek bir indirimden yararlanarak satın alma yapar.

Used also works when the line is a capacity addition rather than a capability addition. You already run the profile, you already know the pass sequence, and your engineers can debug it. The risk that sinks most used purchases is unfamiliarity, and that risk is near zero when the buyer already makes the part.

Üçüncü durum, kendini kanıtlamış bir ürünle sınırlı bütçeyle pazara girmektir: bir tesisin, kalıplara yatırım yapmadan önce bir profilin satılıp satılmadığını test etmesi. İkinci el hattın nihai üretim tesisi değil, bir pilot uygulama olduğu herkesçe anlaşıldığı sürece bu yaklaşım mantıklıdır.

Nine checks before you wire money for a used line

  • Get the original builder’s name, model, and build year, then confirm the builder still exists and still supports that generation.
  • Roll flower veya paso düzeni çizimlerini yazılı olarak isteyin. Bunlar mevcut değilse, yeniden takımlandırma maliyetini daha sonra değil, hemen teklifinize ekleyin.
  • Request video of the line running the profile, unbroken from uncoiler through cut, not an edited sequence of stills.
  • Have parts from that run measured against a drawing — width, depth, flange angle, hole pitch, and twist over a defined length. Photographs of parts prove nothing.
  • Inspect roll surfaces and shaft play at every stand, not a sample. Wear is rarely even along a line.
  • Confirm the controls generation, the drive brands, and whether spares are still manufactured.
  • Check supply voltage, frequency, and total connected load against your plant, and price any conversion.
  • Ask for the conformity documentation and technical file. Note which framework it was prepared under.
  • Establish who is dismantling, loading, shipping, and reinstalling, and who pays when a stand arrives out of alignment.

Checks 2 and 4 eliminate most listings on their own. If a seller cannot supply pass drawings and cannot let you measure parts from a live run, the purchase is a bet on photographs.

Yeni makine alıyorsanız: neleri belirtmelisiniz?

Chenlong’s published product pages list configurable ranges across several production lines: raw material width 10–2,000 mm, rolling thickness 0.2–10 mm, production capacity 0–50 m/min, with materials including SPCC, SPHC, SGCC, SUS, aluminum, and SECC. The shelving line additionally publishes motor power of 3–200 kW, voltage of 110–380 V customized to local supply, and punching die materials of Cr12MoV, SKD11, or DC53. Servo feeder options published across the cabinet, kablo kanalı, ve shelving lines Yaskawa, Delta ve özelleştirilmiş alternatifleri içerir.

Bunları, teslim edilmiş bir makinenin spesifikasyonu olarak değil, ekipman ailesinin kapsadığı sınırlar olarak değerlendirin. Sabit bir genişlikte 1,2 mm galvanizli tava için fiyatlandırılan bir hat, bu işe uygun boyutlandırılmış sehpalara, tahrik sistemine ve takımlara sahiptir. Yayınlanmış bir aralığı teslim edilen kapasite olarak değerlendirmek, teklifleri karşılaştırırken yapılan en yaygın hatadır; ayrıca kullanılmış ilanların gerçekte olduklarından daha iyi görünmesine neden olur, çünkü benzer bir aralık veren bir ilan da aynı türden bir sınırı ifade etmektedir.

Compared with the stock portable machines sold ready to ship, a custom line trades availability for fit: nothing is in stock, but nothing has to be worked around either. Specify the profile drawing, material grade and thickness, coil width and weight, required output in finished pieces per shift, punching pattern with pitch tolerance, and local supply voltage. Those six inputs determine the quotation more than anything else you can say.

Kablo Tavaları

Belgeler makineyle birlikte gelir de gelmeyebilir de

ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction, published by the International Organization for Standardization, sets out the risk assessment framework normally applied to this class of equipment. It is assessed as an assembly, which is why a line that has been split up, moved, and reassembled by a third party raises questions that a standalone machine does not.

For the EU market, the European Commission states that Directive 2006/42/EC applies to machinery placed on the market before 20 January 2027, and that Regulation (EU) 2023/1230 replaces that framework from that date. For a new order this is a question about which framework your technical file will be prepared under — with a 40–60 business day build for custom equipment plus shipping and commissioning, an order placed now can land near that boundary. For a used line, it is a question about what documentation actually exists and whether the seller has it, which is check 8 above for a reason.

What it costs

Özel üretim bir hat için fiyat listesi yoktur ve çiziminiz incelenmeden önce verilen her fiyat başka bir makineye aittir. Chenlong her çözümü müşterinin profil çizimleri, malzeme özellikleri, ürün boyutları, gerekli üretim hızı, delme gereksinimleri, otomasyon seviyesi ve hat konfigürasyonu doğrultusunda tasarlar ve her proje için ayrı fiyat teklifi verir.
Yayımlanmış ticari koşullar:

  • T/T ve L/C kabul edilir
  • 30% down payment on order confirmation, balance after inspection and before shipment
  • Standart ekipman: 20–30 iş günü
  • Custom equipment: 40–60 business days
  • Acil siparişler için hızlandırılmış üretim imkânı sunulabilir

İki fiyatı karşılaştırmadan önce bu ödeme yapısını kullanılmış bir satın alma işlemiyle karşılaştırın. Şimdi ödeyip bakiyeyi katıldığınız bir incelemeden sonra vermek, videoda gördüğünüz bir makinenin bedelini tamamen peşin ödemeye kıyasla maruz kaldığınız riski önemli ölçüde değiştirir.

Sıkça Sorulan Sorular

Q: Does Chenlong sell used roll forming machines?

A: No. Chenlong builds new equipment and custom-engineered production lines. The used-machine checks above are provided because customers ask us to evaluate listings, and the questions are the same regardless of who ends up supplying the line.

S: Gerçekçi olmak gerekirse, ikinci el ne kadar daha ucuzdur?

A: There is no reliable ratio, because used pricing tracks location, urgency, and the seller’s situation more than it tracks capability. Price the total instead: asking price, plus re-tooling if the profile does not match, plus dismantling and shipping, plus electrical conversion, plus the debugging period before the line produces sellable parts.

S: Kullanılmış bir hat profilime göre yeniden takımlanabilir mi?

A: Sometimes, if the stand count, shaft diameter, and frame spacing suit your cross-section. Confirm this with an engineer before purchase rather than after — new roll sets for a section the line was never designed to make can approach the cost of a new line.

S: Yeni bir hat satılabilir parçalar üretmeye ne kadar sürede başlar?

A: Add the published build time — 20–30 business days for standard equipment, 40–60 for custom — to shipping, installation, commissioning, and first-article approval. Plan the project from that total, not from the build figure alone.

Q: What does the servo feeder brand change?

A: Positioning repeatability at the punch, and the spare-parts network behind it. Yaskawa, Delta, and customized options are published for the cabinet, cable tray, and shelving lines, so a preferred brand can normally be specified at order stage. On a used line you take whatever is installed.

Q: Can one line run several profiles?

C: Bazen. Chenlong, kablo tavası hattında farklı tava özelliklerini desteklemek üzere tasarlanmış modüler, ayarlanabilir bir şekillendirme tasarımından bahsediyor. Genişlik veya derinlik açısından farklılık gösteren kesitlere uyum sağlamak, farklı bir bükme sırası gerektiren kesitlere uyum sağlamaktan daha kolaydır.

Q: The listing says it can run 0.2–10 mm. Is that its real capability?

A: Almost certainly not for your part. That style of figure describes what the equipment type can be built to cover. The delivered machine has a drive, stands, and tooling sized for one job, and running well outside that band is a different machine.

Q: What should I send to get a meaningful quotation?

A: Ölçülendirilmiş profil çizimi; delik düzeni ve hatve toleransı, malzeme kalitesi ve kalınlığı, rulo genişliği ve ağırlığı, vardiya başına hedef üretim adedi, çalıştırmayı planladığınız profillerin tamamı ve yerel voltaj ile frekans bilgileri.

Yazar

Chenlong Teknik Ekibi — Kurumsal Teknik Yazar, Weifang Chenlong Intelligent Technology Co., Ltd.

Bu Chenlong Teknik Ekibi represents the company’s engineering and R&D expertise in cold roll forming equipment, customized automated production lines, tooling, and precision cold-formed steel profiles. Chenlong has been engaged in cold roll forming manufacturing since 2006 and operates in-house manufacturing facilities supported by CNC machining, tooling capabilities, custom engineering, and a professional R&D team. Its technical work covers warehousing and racking, electrical and energy equipment, fire protection, construction, automotive manufacturing, and customized industrial profile production, serving customers in more than 50 countries.

Bir Teklif Alın

    • İsim *

    • İletişim Numarası *

    • E-posta *

    • whatsapp *

    • Messgae

    Size 24 saat içinde cevap vereceğiz. Acil durum için lütfen WhatsApp/WeChat ekleyin: +8613863639320,. Veya doğrudan +8613863639320'u arayın.

    *Gizliliğinize saygı duyuyoruz ve tüm bilgiler korunuyor.

    Bilgilerinizi yalnızca sorunuza yanıt vermek için kullanacağız ve asla istenmeyen e-postalar veya tanıtım mesajları göndermeyeceğiz.