من المعدات إلى الملفات - حلول شاملة، موثوق بها في جميع أنحاء العالم.

15
2026.10
ماكينة التشكيل بالدرفلة لقنوات الدعم (Strut Channel): ما تنتجه
08:42

A strut channel مهم. يحوّل لفائف الفولاذ المسطحة إلى قناة دعم ذات حافتين على شكل حرف C، تكون عادةً مثقبة أو مزودة بفتحات على امتدادها، ثم يقطعها إلى الأطوال المطلوبة. ويحمل القطاع الداعم المكتمل حوامل الكابلات والأنابيب والمواسير وقضبان الوحدات الشمسية. لذلك يُوضع هذا الخط بجوار إنتاج حوامل الكابلات وأنظمة التثبيت الشمسي، وليس بديلاً عنه.

What Is a Strut Channel Roll Forming Machine?

It is a continuous cold roll forming line built around one profile family: strut, also called metal framing channel. People often say “Unistrut” for this product. Unistrut is a brand name that became shorthand for the whole category.
The machine does not bend the channel in one hit, as a press brake would. Strip passes through a series of roll stations. Each station changes the cross-section a little until the flat back, the two side walls and the inward-turned lips are formed. Punching and cutting are built into the same line, so the output is finished channel in sellable lengths instead of semi-finished strip.

آلة تشكيل الصلب البارد

المقاطع التي تنتجها

The lips at the open face are what make strut useful. A channel nut fits into the opening anywhere along its length, turns a quarter turn, and locks against the lips. Brackets, clamps and hangers can then be bolted on without drilling on site.
عادةً ما ينتج خط تشكيل القنوات الإنشائية مزيجًا من الأنواع التالية:

  • Plain channel with no holes, for applications that rely only on the lipped opening.
  • Slotted channel with elongated slots along the back, for bolting at variable positions.
  • Hole or knockout patterns set by a specific support-system design.
  • مقاطع أعمق وأقل عمقًا من العائلة نفسها، عندما تُصمم القوالب للتبديل بينها.
  • قناة للتجميع ظهرًا لظهر، حيث تُوصل قناتان مشكلتان بعد الخط لتكوين عنصر أكثر صلابة.

يعتمد عمق المقطع وعرضه وسماكته وخطوة الشقوق على نظام الدعم الذي تنتمي إليه قناة الدعامة والسوق التي تُباع فيها.

داخل الخط: من اللفائف إلى الطول المقطوع

A complete strut line follows the integrated workflow Chenlong describes for its automated production lines. The stations are:

  1. Uncoiler. Holds the coil and pays out strip. Chenlong’s component catalog lists hydraulic and mechanical uncoilers.
  2. Straightener / leveler. Removes coil set so the strip enters the punch flat.
  3. مغذٍ مؤازر. يضبط تقدم الشريط وفق خطوة التثقيب. تبدأ أخطاء تباعد الشقوق من هنا إذا انحرفت التغذية.
  4. Punching station. Can be CNC or hydraulic. Its position before or after forming is a key design decision, covered below.
  5. Roll forming machine. The stand sequence that builds the walls and turns in the lips.
  6. Cutting unit. Hydraulic or CNC cut-off to length.
  7. طاولة الاستلام / آلة ترتيب المنصات. تجمع القناة المكتملة وترصّها.

تشينلونغ sells each of these as a separate equipment category. That matters if an existing plant only needs its punch or its run-out table replaced instead of a whole new line.

آلة تشكيل الصلب البارد

موضع القطاعات الداعمة إلى جانب أنظمة حوامل الكابلات والتثبيت الشمسي

Strut rarely acts as the main product in a support system. It is the structural layer underneath.
In cable tray installations, strut is commonly used for trapeze hangers and wall brackets. The tray itself is a different profile: wider, shallower, often perforated or ladder-type. Chenlong builds production lines for the tray side of this system, including tray-type, ladder, perforated, solid-bottom and channel-type cable tray profiles.
في أنظمة تثبيت الطاقة الشمسية، تُستخدم القناة من نوع الدعامات كقضبان وعوارض عرضية تحمل مشابك الوحدات. تُدرج Chenlong حلول الطاقة الجديدة و custom التطبيقات الصناعية ضمن الصناعات التي تخدمها. تحتاج مشاريع الطاقة الشمسية عادةً إلى دعامات وفقًا لرسم المشروع، مع مواضع فتحات محددة لتجهيزات التثبيت المختارة لذلك المشروع.
The practical point for a manufacturer: if you already supply cable tray or solar structures, strut is the adjacent product your customers buy alongside them. That makes it a natural expansion. It does not mean your existing line can make it.

خط إنتاج القطاعات الداعمة المخصص مقابل الخط المخصص حسب الطلب مقابل شراء القنوات الجاهزة

Specialist suppliers commonly offer dedicated single-profile strut lines. Compared with that category-level approach, a line customized around your own drawings gives tighter control of slot patterns and sizes. In return, every profile has to be engineered up front.

العامل Dedicated strut line خط مُخصّص وفق رسوماتك شراء القناة الجاهزة
ما الذي صُممت لتحسينه عائلة واحدة من قنوات الدعامات بإنتاج كبير Your specific sections and punch patterns No equipment investment
تغيير المقطع الجانبي Limited to the family it was tooled for Defined at design stage; added later only with new tooling Not applicable
Upfront cost المعدات + العدد والقوالب Equipment + tooling + engineering time لا شيء؛ تُضاف التكلفة إلى سعر الوحدة
Control over slot pattern and stock High High Depends on supplier’s catalog
العيب الحقيقي خيار غير مناسب إذا اختلفت رسوماتك عن المجموعة القياسية مهلة زمنية أطول؛ يجب اعتماد الرسومات نهائيًا قبل قص قوالب التشكيل Margin and delivery timing depend on someone else
الخيار الأمثل طلب مستقر على المقاسات القياسية مقاطع مخصّصة للمشروع أو السوق حجم إنتاج منخفض أو غير مؤكد

يستحق العمود الثالث النظر فيه. Chenlong supplies production equipment, finished profiles, or both. For a buyer testing demand in a new market, sourcing channel first and investing in a line once volumes are proven is a legitimate path.

آلة تشكيل الصلب البارد

ستة أمور يجب تحديدها قبل طلب عرض سعر

  1. رسومات المقاطع لكل جزء تخطط لإنتاجه. إذا كنت ستضيف عمقًا ثانيًا العام المقبل، فأدرجه الآن. فالقوالب المخططة لمقطع واحد نادرًا ما تلائم مقطعًا آخر.
  2. Material grade, thickness range, coil width and coating. Note whether you form pre-galvanized coil or galvanize after forming. The choice affects cut-edge protection and the surface the rolls contact.
  3. Punch pattern with dimensions and pitch, plus your preference (or open question) on pre- versus post-punching.
  4. أطوال القطع وسماحية الطول التي يقبلها عملاؤك.
  5. Required output per shift, not only line speed. Punching and stop-start cutting reduce effective throughput below the nominal m/min figure, so ask the supplier to estimate output for your actual pattern.
  6. ظروف الموقع: جهد التغذية وتردده، ومساحة الأرضية، وما إذا كنت تحتاج إلى التكديس أو التجميع التلقائي عند المخرج.

Standards and Safety Points Worth Raising

تجمع خطوط قنوات الدعامات بين التثقيب والقطع، وكلاهما منطقتان شديدتا الخطورة. يحدد المعيار ISO 12100:2010 (المنظمة الدولية للتقييس) المبادئ العامة لتقييم المخاطر والحد منها في تصميم الآلات. ومن الأسئلة التقنية المنطقية أن تسأل المورّد عن مدى اتباع وسائل الحماية وأنظمة التعشيق لديه لهذا النهج.
بالنسبة إلى الخطوط المتجهة إلى الاتحاد الأوروبي، أصبح التوقيت مهمًا الآن. ووفقًا للمفوضية الأوروبية، تخضع الآلات المطروحة في سوق الاتحاد الأوروبي قبل 20 يناير 2027 للتوجيه الخاص بالآلات 2006/42/EC. وتُطبَّق اللائحة (EU) 2023/1230 اعتبارًا من ذلك التاريخ. وقد تُشحن إحدى الخطوط المتعاقد عليها في أواخر عام 2026 قبل ذلك التاريخ أو بعده، لذا تأكد من الإطار التنظيمي الذي سيُشار إليه في إعلان المطابقة. وتمثل علامة CE إعلانَ مطابقة من الشركة المصنّعة بموجب هذه القواعد، ولا ينبغي التعامل معها على أنها شهادة عامة صادرة عن طرف ثالث.

الأسئلة الشائعة

Does Chenlong sell a dedicated strut channel roll forming machine?

Not as a named catalog product. Chenlong’s published lines cover cable tray, shelving, purlins, keels, panels, door frames and cabinet components. A strut request would be assessed as a custom engineering project based on your drawings.

هل يمكن لخط التشكيل بالدرفلة لحوامل الكابلات أن ينتج أيضًا قنوات الدعامات؟

Not without separate tooling, and usually not efficiently. Tray profiles are wide and shallow, while strut needs fully inward-turned lips. The two should be treated as different forming problems even when they share a punch and cut-off design.

كم تبلغ تكلفة آلة التشكيل بالدرفلة لقنوات الدعامات؟

Chenlong quotes every line per project. The price depends on the number of profiles, punch pattern, punching sequence, line speed and automation level, so a figure without drawings would not be meaningful.

ما المهلة الزمنية التي ينبغي أن أضعها في الحسبان؟

تنشر Chenlong مدة تتراوح بين 20 و30 يوم عمل للمعدات القياسية، وبين 40 و60 يوم عمل للمعدات المصممة حسب الطلب. وسيكون خط القنوات الإنشائية المصمم وفق رسوماتك مُخصّصًا. وقد يتوفر إنتاج مُعجّل للطلبات العاجلة.

احصل على عرض سعر

    • الاسم *

    • رقم الاتصال *

    • البريد الإلكتروني *

    • واتساب *

    • رسالة

    سوف نرد عليك خلال 24 ساعة. إذا كانت الحالة عاجلة، يرجى إضافة واتساب/وي تشات: +8613863639320، أو الاتصال مباشرة على +8613863639320.

    *نحن نحترم خصوصيتك وجميع المعلومات محمية.

    سنستخدم معلوماتك فقط للرد على استفسارك ولن نرسل أبدًا رسائل بريد إلكتروني غير مرغوب فيها أو رسائل ترويجية.