Temporary Power Distribution Boxes: Uses and Sourcing Guide
A temporary power distribution box is a portable enclosure that takes one incoming supply …
Um temporary power distribution box is a portable enclosure that takes one incoming supply and splits it into several protected outlets for construction sites, events and outdoor work. Often called a spider box, it is built for relocation and rough handling. Chenlong does not make finished boxes, but supplies cold-formed enclosure profiles and roll forming equipment to OEMs.

The box receives power from a generator, a utility connection or a larger distribution panel. Inside, breakers and outlets divide that supply into separate circuits so several tools or loads can run at once, each with its own protection. Residual-current protection (called RCD or GFCI depending on the region) is common on these units, though the exact requirement is set locally.
The common thread is that the box is moved often and installed by people who are not its designers.

A fixed wall-mounted panel sits in a controlled spot and is rarely touched. A temporary box is dragged, dropped, stacked, rained on and driven over. That changes what the enclosure has to do.
Chenlong manufactures cold roll forming equipment and automated production lines
Its most relevant published products:
Published configurable range for the equipment line:
| Parâmetro | Published range |
| Materiais | SPCC, SPHC, SGCC, SUS, alumínio, SECC |
| Largura da matéria-prima | 10–2,000 mm |
| Espessura de laminação | 0.2–10 mm |
| Velocidade de produção | 0–50 m/min |
| Servo feeder options | Yaskawa, Delta, or customized |
Chenlong states that these ranges are customizable to project requirements.

Buying finished profiles avoids capital outlay and suits OEMs with moderate or uncertain volume. Buying a line gives control of production and changeover but needs a profile range and volume that justify tooling, since each profile needs its own rolls. Many temporary-box OEMs also make sheet-metal bodies by bending and punching, where roll forming covers only the frames and rails.
What is a spider box?
It is a common North American name for a portable temporary power distribution box that splits one supply into several protected outlets.
Does Chenlong sell finished temporary power distribution boxes?
No. Chenlong supplies cold roll forming equipment and cold-formed enclosure profiles. Electrical components and finished boxes are outside its catalog.
Which materials can the electrical cabinet line process?
The published list is SPCC, SPHC, SGCC, SUS, aluminum and SECC, within 0.2–10 mm thickness and 10–2,000 mm width, configured per project.
Can I buy profiles instead of a production line?
Yes. Chenlong states that customers may source equipment, finished profiles or integrated solutions.
What should I send for a quotation?
Profile drawings or samples, material and thickness, expected volume, punching requirements and the automation level you want.
A temporary power distribution box is a portable enclosure that takes one incoming supply …
Seven electrical panel board types explained for cabinet and switchgear manufacturers, plu…
Responderemos dentro de 24 horas. Para casos urgentes, adicione WhatsApp/WeChat: +8613863639320. Ou ligue diretamente para +8613863639320.
*Respeitamos sua confidencialidade e todas as informações estão protegidas.
Usaremos suas informações apenas para responder à sua consulta e nunca enviaremos e-mails não solicitados ou mensagens promocionais.